About Mobostar MB
Posted: Sun Oct 01, 2006 9:47 am
hey guys,
I currently have a`mobostar x533 motherboard. I want to upgrade my CPU, but i dont know what processor speed is needed and if it takes pentium 4 CPU or pentium 4 celeron CPU and what is the maximum processor speed it can take. So i was wondering if you guyz can help me. I am going to tell you the specs of the motherboard that i got off the manual. Thanks for taking the time to read this. Please respond to me.
CPU: Socket 478, Intel Pentium 4/Celeron
Chipset: North Bridge: VIA P4X266E, FSB @ 533MHz South Bridge: VIA VT8235
Clock Generator: 100Mhz- 200Mhz
Memory: 2 slots for DDR: DIMM1 and DIMM2 (PC1600/PC2100)Max. 2GB2 slots for SDR:
DIMM3 and DIMM4 (PC100/PC133)Max. 2GB
IDE: IDE1: ATA 133/Ultra DMA Mode 6;IDE2: ATA 133/Ultra DMA Mode 6;Can connect
up to 4 IDE Devices
Floppy Port: Support floppy disk drive
Audio: 2 channels AC’97 Audio
LAN: Speed: 802.3u (10/100 Ethernet), WOL supported
PCI slots: 6 slots with PCI specification 2.2
AGP slot: 1 universal AGP slot, supports 3.3v / 1.5v, 4X / 2X / 1X AGP card
USB 2.0: 4 default USB 2.0 ports and a set of header for two additional USB 2.0
ports upgrade
I/O Panel: Ps/2 Keyboard / mouse; RJ 45; 4 rear default USB 2.0ports; 1 seriel
port: COM1; 1 parallel port: ECP/EPP support; Audio Jack: Line out/ Line in/
Microphone + Game port
BIOS: AMI BIOS; Supports “Plus and Play”; ACP 1.1 compliance wake up events;
supports jumperfree; SMBIOS 2.3.1 support; CPU frequency stepless control (only
for advanced users reference)
OS:Platform: Windows 98SE / ME / 2000 / CP complaintATX form factor (12.0” x
9.6”)
I currently have a`mobostar x533 motherboard. I want to upgrade my CPU, but i dont know what processor speed is needed and if it takes pentium 4 CPU or pentium 4 celeron CPU and what is the maximum processor speed it can take. So i was wondering if you guyz can help me. I am going to tell you the specs of the motherboard that i got off the manual. Thanks for taking the time to read this. Please respond to me.
CPU: Socket 478, Intel Pentium 4/Celeron
Chipset: North Bridge: VIA P4X266E, FSB @ 533MHz South Bridge: VIA VT8235
Clock Generator: 100Mhz- 200Mhz
Memory: 2 slots for DDR: DIMM1 and DIMM2 (PC1600/PC2100)Max. 2GB2 slots for SDR:
DIMM3 and DIMM4 (PC100/PC133)Max. 2GB
IDE: IDE1: ATA 133/Ultra DMA Mode 6;IDE2: ATA 133/Ultra DMA Mode 6;Can connect
up to 4 IDE Devices
Floppy Port: Support floppy disk drive
Audio: 2 channels AC’97 Audio
LAN: Speed: 802.3u (10/100 Ethernet), WOL supported
PCI slots: 6 slots with PCI specification 2.2
AGP slot: 1 universal AGP slot, supports 3.3v / 1.5v, 4X / 2X / 1X AGP card
USB 2.0: 4 default USB 2.0 ports and a set of header for two additional USB 2.0
ports upgrade
I/O Panel: Ps/2 Keyboard / mouse; RJ 45; 4 rear default USB 2.0ports; 1 seriel
port: COM1; 1 parallel port: ECP/EPP support; Audio Jack: Line out/ Line in/
Microphone + Game port
BIOS: AMI BIOS; Supports “Plus and Play”; ACP 1.1 compliance wake up events;
supports jumperfree; SMBIOS 2.3.1 support; CPU frequency stepless control (only
for advanced users reference)
OS:Platform: Windows 98SE / ME / 2000 / CP complaintATX form factor (12.0” x
9.6”)