Setting up public WIFI

Ye' old general discussion board. Basically, for everything that isn't covered elsewhere. Come here to shoot the breeze, shoot your mouth off, or whatever suits your fancy.
This forum is not for asking programming related questions.

Moderator: General Moderators

Post Reply
User avatar
Benjamin
Site Administrator
Posts: 6935
Joined: Sun May 19, 2002 10:24 pm

Setting up public WIFI

Post by Benjamin »

Has anyone here ever setup a wireless network so all the neighbors can use it for free?

I have 2 wireless routers, a cable modem and a firewall router. The firewall supports QOS traffic management and I believe at least one of the wireless routers does as well.

What I'd like to do is set this up so that I have a private network with LAN access, and a public network without access to the LAN. I'd also like to route the public traffic though a QOS manager so that bandwidth used on the private network is higher priority traffic.

Is this possible? I have no clue how to set this up but I believe I have all the equipment I need.

Thoughts?
toasty2
Forum Contributor
Posts: 361
Joined: Wed Aug 03, 2005 10:28 am
Location: Arkansas, USA

Post by toasty2 »

I'm guessing you would have the modem plugged into a router. That router is the private lan. Have the firewall plugged into that and then the router. The firewall would limit the bandwidth of the router plugged in or something. So, the first one is the private, but the public is plugged into it (with the limits of the firewall between). I think that would work, but there's probably a better way.
User avatar
Kieran Huggins
DevNet Master
Posts: 3635
Joined: Wed Dec 06, 2006 4:14 pm
Location: Toronto, Canada
Contact:

Post by Kieran Huggins »

What you want is a Linksys WRT54GL and one of the linux firmwares from http://wrtrouters.com .... The DD-WRT + Hotspot firmware is likely the easiest method.

Incidentally, the 54GL is simply the best home router in existence. Period.
User avatar
ReverendDexter
Forum Contributor
Posts: 193
Joined: Tue May 29, 2007 1:26 pm
Location: Chico, CA

Post by ReverendDexter »

You may wish to check the legal ramifications of this before proceding. I believe that the legal climate has changed somewhat recently, and as you're effectively an endpoint, may be liable for the traffic that goes through your network.
User avatar
Benjamin
Site Administrator
Posts: 6935
Joined: Sun May 19, 2002 10:24 pm

Post by Benjamin »

I actually have the 54GS. I was going to use that for the private network and the POS Netgear for the public network. I guess I can just assign the routers local IP's. Not sure about the Netgear though. Anything I change on it randomly gets changed to something else within 2 hours. Duly noted on the legal issues.
User avatar
Kieran Huggins
DevNet Master
Posts: 3635
Joined: Wed Dec 06, 2006 4:14 pm
Location: Toronto, Canada
Contact:

Post by Kieran Huggins »

The GS *may* work, but you'll have to check the serial number against the list on the site I posted above. Some revisions of the GS are not compatible with 3rd party firmware.
User avatar
guitarlvr
Forum Contributor
Posts: 245
Joined: Wed Mar 21, 2007 10:35 pm

Post by guitarlvr »

This is exactly what you are looking to do. It will also give you access to other routers as you travel since you are using this company. I got my router for free (not sure if that is still an option) but basically it allows you to setup a private lan and then allow anyone to connect to a portion of your bandwidth (which you set) for free. Then when you travel, if there are others on the network, it will let you use more bandwidth than other people using the free service. Check it out, its pretty cool.
Post Reply